SHOWA GIKEN VIỆT NAM
Công ty Ngân Anh Phát là nhà phân phối và cung cấp các dòng sản phẩm chính hãng khớp nối từ nhà sản xuất Showa giken xuất xứ Japan
SHOWA GIKEN VIỆT NAM
Khí nén - Thủy lực Showa Giken Việt Nam
Các dòng sản phẩm về khí nén thủy lực Showa Giken được công ty chúng tôi phân phối và cung cấp tại thị trường Việt Nam gồm
Khớp nối xoay tiêu chuẩn (STANDARD ROTARY JOINTS)
| SERIES | FEATURES | SERVICE CONDITIONS | CONSTRUCTION DIMENSIONS | |
1.AC Series | 1. Can be alternated between heating and cooling 2 .Capable of high temperature and pressure under high rotation speed 3. Long life due to low seal-face friction and wear We have the specification of 180 degrees C (356 degrees F) or more. | Fluid | Steam.Therm Oil.Water.Air | ver.007.4 1.70MB |
| Max. Temperature | 180 degrees C (356 degrees F) | |||
| Max. Pressure | 1.47MPa | |||
| Max. Rotation Speed | 15A to 40A 300min-1 50A to 80A 100min-1 | |||
2.NC Series | 1. Need no lubrication,low maintenance 2. Capable of high temperature and pressure 3. Long life due to low friction and less wear 4. Simple design,easy maintenance ONC type for the hot oil of 300 degrees C (572 degrees F) or more, is also available upon request. | Fluid | Steam.Therm Oil | ver.007.2 808KB |
| Max. Temperature | 180 degrees C (356 degrees F) | |||
| Max. Pressure | 1.47MPa | |||
| Max. Rotation Speed | 15A to 40A 300min-1 50A to 80A 100min-1 | |||
3.RX Series | 1. Rx series joints offer long trouble-free and leakproof operation with ease of maintenance due to employing ceramic seal and brass casing. 2. To secure the reliable sealing,the carbon and ceramic seal faces are lapped to an optical flatness. 3. 4 vented holes in casing enable to detect leakage before fluid corrodes the ball bearings. RXE SUS Series In addition to the rotor, the casing and spring catch are also made of SUS. | RXE type | ver.007.5 1.05MB | |
| Fluid | Water.Oil.Air.Gas | |||
| Max. Temperature | 100 degrees C (212 degrees F) | |||
| Max. Pressure | [Vacuum:Up to 13.KPa abs for each size] 10A to 25A 2.25MPa 32A to 40A 1.67MPa 50A to 80A 1.18MPa Air or gas:for each size Max. 0.98MPa | |||
| Max. Rotation Speed | 10A to 25A 3500min-1 32A to 40A 2000min-1 50A to 80A 750min-1 | |||
| RXK type | ||||
| Fluid | Water.Oil.Air.Gas | |||
| Max. Temperature | 100 degrees C (212 degrees F) | |||
| Max. Pressure | 90A , 100A 500min-1 | |||
| Max. Rotation Speed | 90A , 100A 0.98MPa | |||
| RXH type | ||||
| Fluid | Water. Hot Water.Therm Oil | |||
| Max. Temperature | 150 degrees C (302 degrees F) | |||
| Max. Pressure | [Vacuum:Up to 13KPa abs for each size] 10A to 25A 2.25MPa 32A to 40A 1.67MPa 50A to 80A 1.18MPa | |||
| Max. Rotation Speed | 10A to 25A 3500min-1 32A to 40A 2000min-1 50A to 80A 750min-1 | |||
4.KC Series | 1. Light in weight due to aluminum casing 2. Compact design and simple construction 3. Lubrication-free due to sealed ball bearing 4. Capable of high rotation speed The straight flow-path type is also available upon request. | Fluid | Air.Gas.Water.Oil | ver.007.2 516KB |
| Max. Temperature | 100 degrees C (212 degrees F) | |||
| Max. Pressure | 0.98MPa | |||
| Max. Rotation Speed | 6A to 25A 1500min-1 32A to 65A 1000min-1 | |||
5.SXO Series | 1. This joint is mainly served for drilling and boring operations of various machine tools. 2. Under high pressure or high rotation speed,SXO operates efficiently due to its accurate machined rotor and advanced seal technology. 3. In addition to standard "Carbon Graphite to Hardened Tool Steel"seal,SXO offers "Tungsten Carbide to Ceramic"(TCC)seal for longer service life. | STRAIGHT THRU TYPE /RIGHT ANGLE TYPE | ver.007 428KB | |
| Fluid | Machining Oil.Water.Oil | |||
| Max. Temperature | 120 degrees C (248 degrees F) | |||
| Max. Pressure | 6.9MPa | |||
| Max. Rotation Speed | 10000min-1 | |||
| COMPACT TYPE | ||||
| Fluid | Machining Oil.Water.Oil | |||
| Max. Temperature | 120 degrees C (248 degrees F) | |||
| Max. Pressure | 10.3MPa | |||
| Max. Rotation Speed | 15000min-1 | |||
6.ACCESSORIES | 1. SIPHON ELBOW 2. SIPHON PIPE 3. FLEXIBLE TUBE | ver.007 160KB | ||
Khớp nối xoay tiêu chuẩn (STANDARD SWIVEL JOINTS)
| SERIES | FEATURES | SERVICE CONDITIONS etc. | CONSTRUCTION | |
1.A Series | 1. These Swivel Joints can be rotated 360 degrees. 2. They have large mechanical strength. 3. The structure remains simple. Please consult us for use with a fluid at 100 degrees C (212 degrees F) or more or with a special fluid. | Max. Pressure | 4.1MPa | ver.007.1 421KB |
| Max. Temperature | 100 degrees C (212 degrees F) | |||
| Material | Ductile Cast Iron (Carbon steel in part) | |||
| Seal | NBR O-ring | |||
| Connection | Female Taper Thread (Rc) | |||
2.AS Series | 1. These Swivel Joints can be rotated 360 degrees. 2. They have large mechanical strength. 3. The structure remains simple. Please consult us for use with a fluid at 100 degrees C (212 degrees F) or more or with a special fluid. | Max. Pressure | 10A to 50A 4.1MPa 65A to 80A 2.1MPa | ver.007.1 336KB |
| Max. Temperature | 100 degrees C (212 degrees F) | |||
| Material | Stainless Steel | |||
| Seal | NBR O-ring | |||
| Connection | Female Taper Thread (Rc) | |||
3.C Series | 1. These Swivel Joints can be rotated 360 degrees. 2. They have large mechanical strength. 3. The structure remains simple. Please consult us for use with a fluid at 100 degrees C (212 degrees F) or more or with a special fluid. | Max. Pressure | 2.1MPa | ver.007.1 398KB |
| Max. Temperature | 100 degrees C (212 degrees F) | |||
| Material | Weld steel | |||
| Seal | NBR O-ring | |||
| Connection | Flange | |||
4.CS Series | 1. These Swivel Joints can be rotated 360 degrees. 2. They have large mechanical strength. 3. The structure remains simple. Please consult us for use with a fluid at 100 degrees C (212 degrees F) or more or with a special fluid. | Max. Pressure | 2.1MPa | ver.007.1 383KB |
| Max. Temperature | 100 degrees C (212 degrees F) | |||
| Material | Weld stainless steel | |||
| Seal | NBR O-ring | |||
| Connection | Flange | |||
5.B Series | 1. These Swivel Joints can be rotated 360 degrees. 2. They have large mechanical strength. 3. The structure remains simple. | Max. Pressure | 13.7MPa | ver.007.2 333KB |
| Max. Temperature | 100 degrees C (212 degrees F) | |||
| Material | Steel (Weld steel) | |||
| Seal | NBR O-ring | |||
| Buck-up Ring | PTFE | |||
| Connection | Female Taper Thread (Rc) | |||
6.SRK Series | 1. With the excellent pressure balance design, thrust load generated from the internal pressurized fluid is balanced well so that excessive load is not added to the bearing. They endure extreme pressures and provide stable operation with little rotary torque fluctuations due to pressure. 2. Large mechanical strength due to an <O-ring> with special backup ring used in the seal seciton and 2 <radial ball bearings> contained in the bearing section. 3. Maintenance is easy, with simple structure and <O-ring> and <backup ring> being the only consumables. Flange-type joints (SRK-2F and 3F) can also be manufactured upon request. Please inform the flange specifications. We have SSH series made of SUS. | Max. Pressure | 10A to 40A 34.3MPa 50A to 80A 24.5MPa | ver.007 367KB |
| Max. Temperature | 100 degrees C (212 degrees F) | |||
| Material | Steel (Weld Steel) | |||
| Seal | NBR O-ring | |||
| Connection | Female Taper Thread (Rc) | |||
7.PK Series | 1. Self alignment make piping easy. 2. Easy handling and piping due to small size and light weight 3. No need for lubrication, easy to maintain PK-*S series is also available. PK-*S series incorporates a spacer between the body and axis of rotation to reduce eccentricity of the axis of rotation. PKZ series for alternating heating and cooling operations is also available upon request. | Max. Pressure | 2.3MPa | ver.007 713KB |
