CẢM BIẾN BÁO CHÁY NGOÀI TRỜI TAKEX
Chi tiết kỹ thuật các dòng sản phẩm chính hãng cảm biến báo cháy ngoài trời FS-5000E từ nhà sản xuất Takex xuất xứ Japan được công ty Ngân Anh Phát chúng tôi phân phối và cung cấp tại thị trường Việt Nam
CẢM BIẾN BÁO CHÁY NGOÀI TRỜI TAKEX
FLAME SENSOR OUT DOOR
Chi tiết kỹ thuật các dòng sản phẩm chính hãng cảm biến báo cháy ngoài trời FS-5000E từ nhà sản xuất Takex xuất xứ Japan được công ty Ngân Anh Phát chúng tôi phân phối và cung cấp tại thị trường Việt Nam
Các tính năng chính cảu dòng FS-5000E
+ Cảm biến báo chay bằng tia cực tím với độ nhạy cao
+ Giá đỡ xoay đa hướng
+ Đầu ra relay NO/NC
+ Điều chỉnh thời gian phản hồi
+ Dùng được trong nhà lẫn ngoài trời
Model:
FS-5000E
Thông số cảm biến báo cháy dùng ngoài trời FS-5000E:
Model | FS-5000E |
Detection system | Ultraviolet rays detection (detected wave length 180~260nm) |
Detection area | Distance: 10m (33ft) max. (7cm flame) Angle · Horizontal: approx. 100 degrees (60 degrees downward) · Vertical: approx. 75 degrees (15 degrees upward) Adjustment range · Horizontal 25 degrees by base unit · Vertical 30 degrees (4 steps) by sensor head |
Sensitivity adjustment | Sensitivity: H (100%), L (50%) (selectable) Detection timer: 1sec, 6sec, 15sec, 30sec (selectable) |
Power supply | 10V to 30VDC |
Power consumption | 35mA or less |
Alarm output | Dry contact relay Form C (NO/NC) Contact capacity: 30V (AC/DC) 0.5A, (resistance load) Operation time: the following are selectable · Detection time + off delay operation approx. 2sec to 1min · Detection time + off delay operation approx. 5sec to 10min Output operation: the following are selectable · Same time as above continuous output · Same time as above flashing output Operation mode (day/night function): · 5 lux night time operation · ∞ lux day time operation (adjustment volume) |
Alarm memory | Memory LED blinks for 3min., then lights for 47min. (auto-reset) |
LED | Operation LED (red): synchronous dry contact relay Memory LED (yellow): blinks for 3min and then lights |
Wiring | Reed wiring Power supply: 2 / dry contact: 3 |
Ambient temperature | -20°C to +50°C (-4°F to +122°F) |
Installation | Indoor/outdoor |
Weight | Approx. 550g (19.3oz) |
Appearance | Sensor part: PC resin (white) Bracket: AES resin (white) |
Supplied accessories | · Tapping screw ∅6 x 30: 4pcs · Tapping screw ∅4 x 8: 1pc · Band: 1pc · Area mask seal: 1pc |